Wired Door Sensor BJ03F

Feature:

  1. Aluminium alloy housing for long time use
  2. Using USA made sensor in order for stability performance
01.Sensing Distance: >40mm
02.Shell Material: Aluminum alloy
03.Contact Mode: NC (normally closed)
04.Maximum Contact Rated Power: 10W
05.Maximum Switching Voltage: DC100V
06.Contact Resistance: ≦0.1Ω
07.Fixing Method: Screws
08.Maximum Limit Current: 0.5A
09.Screws Weight: 5g
10.Connection Wire: 27cm
11.The Upper Part Dimension: 50*18*10mm
12.The Next Part Dimension: 50*18*10mm
13.The Upper Part Weight: 23g
14.The Next Part Weight: 28g

Feature:

  1. Aluminium alloy housing for long time use
  2. Using USA made sensor in order for stability performance

Installation Notes:

  1. The magnet part is mounted on a movable door or window, and the switch part is mounted on the frame of the door or window
  2. The two parts of the magnetic switch and the switch must be arranged side by side, not dislocation, the distance between the two parts should be less than 5mm, equal to 0 is the most ideal state, if the distance between the two parts is greater than the moving distance of the product after installation, the product will lose its effect.
  3. The magnetic switch should be installed in a place that is not easily accessible to humans or animals, such as the top or upper part;